This information may change. Always check the official source.Last verified: August 2026 by Ondřej Kadlec
Sockets and voltage in Qatar
- Type DBS 546, 5 AEarthed
- Type FCEE 7/3 (Schuko)Earthed
- Type GBS 1363Earthed
- Type LCEI 23-50Earthed
- Voltage
- 240 V
- Frequency
- 50 Hz
- Earthed sockets
- Type D, Type F, Type G, Type L
British Type G is normal in new buildings; Type D, F and L survive in older ones.
What you need, by where you are coming from
- Arriving from the United States or CanadaA plug adapter, and appliances marked 100-240 V. Anything single-voltage needs a converter.
- Arriving from the UK or IrelandPlugs go straight in and the voltage matches. Nothing to pack.
- Arriving from most of continental EuropePlugs go straight in and the voltage matches. Nothing to pack.
- Arriving from Australia or New ZealandA plug adapter is enough - the voltage is the same as at home.
Socket types, voltage and frequency are the nominal domestic supply as published in IEC/TR 60083 and the national standards it lists.
Qatari sockets are British Type at 240 V, with round-pin and Italian outlets surviving in older buildings.
Sockets in Qatar are Type at 240 V, 50 Hz in new buildings, with Type , and in older ones.
- British plugs fit straight in almost everywhere modern.
- Older buildings are a lottery - round-pin Type , Schuko Type and even Italian Type outlets are all in use, which is why hotels keep universal sockets.
- A Europlug fits the Type and outlets, and nothing in a Type socket without an adapter.
- 240 V, so American 120 V-only appliances need a converter.
- The UAE and Bahrain are Type too, so a Gulf itinerary needs one adapter and a spare.
- Hotel bathrooms have low-current shaver sockets, which take a Europlug and will not run a hair dryer.
Sources (1)
What this guide was checked against. Rules and prices change — follow the official link before you rely on a detail.
Comments
No comments yet. Share the first one.
Share a tip
Sign in to continue.